Tips and tricks in mirror axis machining, the following is a small series of Longfeng mechanical mirror axis processing factory to introduce you.

In the process of production and processing in the machinery industry, although some details are very inconspicuous, if we can get inspiration from it, we can use our brains and brains to find ways to help our work. For your reference, the tips from the masters of the machining industry are for your reference.

Tuen Mun 1: Remove the jaws of the vise, and machine two M4 threaded holes, two steel plates 2 that are 1.5 mm thick with the jaws, and rive the hard brass plate with a thickness of 0.8 mm with aluminum countersunk rivets 3 Fasten the M4 countersunk screw 1 to the jaws to form a durable soft jaw. This also protects the hardware from being pinched and interchangeable.

Tuen Mun 2: It is inconvenient to suck and take small parts (feet parts) with magnets. You can suck an iron plate 2 under the magnet 1. Not only can you suck a lot of small pieces, but also pull the iron plate away, the small pieces will immediately Automatically dumped into the collection box, not enough to impress, but very practical.

Tuen Mun 3: When the pulley is driven, the pulley often slips between the pulley and the axle. On the axle, use the ~15~18mm to drill the drill bit to draw the nest. This can form the adsorption force, prevent slipping, turn waste into treasure, and the boss will reward.

Tuen Mun 4: When the 1 hex wrench is short and can't be stressed, the tube with the inner diameter smaller than the wrench can be inserted into the slot from the boring slot, which can be used as a long handle.

Tuen Mun 5: For the case of tightening the workpiece, it is first positioned and then clamped. However, for a workpiece, the first clamping and repositioning, because the workpiece will be deformed when clamping, it should be clamped and repositioned first. Point the location and find the freedom to limit it.

The above is the mirror shaft processing factory to introduce you to these tips and knocks. Most of the employees found in the usual work, these tips, on the surface really can not represent anything, but when used more, you can include yourself for the company Bring a lot of benefits. I hope that you will find more tips and tricks in your work later.